Changing Hands with gear Brake Function

Including the hand brake that is often overlooked. But, when I have to park the car on ramp or a derivative, just remembered how important this one stopper device.

Hand brake function could be replaced with tooth gears. However, you should really consider in the gears. When in the incline, the gears that enabled the reverse gear. However, when in derivatives, the most appropriate use 1st gear.

When you use reverse gear when the car was in a derivative, then this can cause tooth timing belt slack. If the chance after the timing belt of your car a little loose, it can also tooth timing belt was jumping and the car can not be turned on again. In addition, if the car had rolled a few inches, there might exist some dirt from the exhaust into the engine. Of course this is fatal. The same result can occur if a tooth one you use to prop up the car on the uphill position.
Therefore, careful heart. To guard against these risks, it is better you still get jammed the wheels of the car as safe as possible when functioning as a substitute for hand brake gear.